Glixtone Fungi-Shield Decorative Interior Coatings kill and prevent the growth of mould, algae and fungus. They are available as matt, silk and anti-condensation finishes which are all suitable for areas subject to warm, moist air including kitchens, breweries, cellars, laundries and leisure centres. All products are water-based, washable and very hard wearing. They are non-toxic and odour free when dry and totally resistant to mould growth.

Fungi-Shield Matt Wall Coating FS42 is an environmentally friendly, water-based, washable decorative fungicidal matt finish paint for internal use to eliminate mould, algae and fungus.

Environmentally friendly.
Water-borne.
Choice of colours.
Non toxic.

Fungi-Shield Silk Wall Coating FS43 is an environmentally friendly, water-based, washable decorative fungicidal silk finish paint for internal use to eliminate mould, algae and fungus.

Environmentally friendly.
Water-borne.
Choice of colours.
Non toxic.

Fungi-Shield Underground Paint - A ready to use coating for areas exposed to high levels of humidity. Suitable for use in basements & cellars.

Keeps mould and fungal growth at bay.
Can be applied to damp surfaces.
Smooth finish.
Prevents efflorescence.

Fungi-Shield Anti-Condensation Coating AC40 is an environmentally friendly, water-based non-toxic fungicidal anti-condensation coating that is used as a thermal barrier coating for ceilings subject to warm moist air.

Environmentally friendly.
Water-borne.
Choice of attractive colours.
Quick drying

Fungi-Shield Sterilising Solution GS36/GS37 These sterilising solutions are suitable for surface sterilisation of prepared substrates prior to application of the appropriate decorative system. GS37 is a specially prepared, ready-to-use water-based surface biocide which effectively kills spores, mould and algae. GS36 is a concentrated form of GS37.

Anti Graffiti

Glixtone Anti Graffiti coatings protect the substrate from damage and enables easy removal of Graffiti. This range of Non Sacrificial products offers protection to brick, stone, concrete and render as well as wood, metal, plastic and most exterior and interior paint finishes.

Anti-Graffiti Glaze AG1 is an extremely hard, yet flexible, clear, tough polyurethane glaze that has been designed for exterior application in areas subject to defacement by graffiti. AG1 is solvent-based suitable for all year round use. It is dirt and water repellent, as well as being resistant to oil and grease. AG1 may be applied onto masonry, wood or previously painted surfaces.

Non sacrificial.
Can be applied to previously painted surfaces.
Easy to apply.

Anti-Graffiti Glaze AG4 is a quick drying clear coating available in matt or gloss. It is non sacrificial and has excellent UV resistance. It also has the benefit that if treated and graffiti is applied the offending graffiti can be removed with warm soapy water.

Quick drying.
Non sacrificial.
Excellent UV resistance.

Graffiti Remover AG3 is a specially formulated blend of solvents and biodegradable detergents. AG3 is designed to remove graffiti from the surface of Glixtone Anti-Graffiti Glaze AG1 and other protective coatings. It is easy to apply with a cloth or brush and is effective on other protective coatings with an anti-graffiti glaze. This product is also suitable for most types of surfaces without anti-graffiti protection (except plastics) and non-porous surfaces (tiles) with a heavy build-up of graffiti.

Anti-Graffiti Paint AG5 Water based - This 'new' environmentally friendly paint is a non sacrificial two pack system which if required can be applied over existing graffiti in generally just one coat. Available in white, tinted colours or even clear this water based anti-graffiti paint is set to take the anti-graffiti market by storm!

Clear.
Water based.
Non sacrificial.

Anti-Carbonation

Anti-Carbonation Coating AC1 - 33 years protection. This is a high-performance, environmentally friendly water-based exterior/interior coating with outstanding anti-carbonation properties.

33 years protection.
Satisfies Class 'O' Building Regulations.
Outstanding CO2 and other acid gas resistance.
Extremely high moisture vapour permeability.
High UV resistance for lasting appearance.
Dirt repellent.
Waterproof and blister proof.
Resistant to alkali, oil and grease.
Outstanding resistance to weathering.
Bright white colour (no yellowing).
Enhances lux values.

Anti-Carbonation Coating CC09 - 15 year protection.

Advanced, water-based, exterior coating with excellent anti-carbonation properties. Suitable as a weather-resistant protective and decorative finish for concrete, cement render, most masonry surfaces and metals with a suitable primer.

Good C02 and other acid gas resistance.
High UV resistance for lasting appearance.
Dirt repellent.
Waterproof and blister proof.
Resistant to alkali, oil and grease.
Outstanding resistance to weathering.
Moisture vapour permeable.

Glixtone Exterior Protection Coatings are formulated to the highest standard to guarantee outstanding durability and cost-effectiveness. They enhance the appearance of buildings whilst providing an exceptional level of protection from the elements. The Glixtone range includes both water-based and solvent-based formulations providing particular benefits, such as algaecidal protection, to meet all application and performance criteria.

Glixtone Waterproof Masonry Coatings combine excellent opacity with high UV resistance and minimal dirt retention. This ensures they retain their colour and stay cleaner for longer.

Considerable financial savings are achievable due to longer life and low maintenance requirements!

High Performance Smooth Anti-Carbonation Coating AC1
An outstanding, environmentally friendly water-based exterior coating with outstanding anti-carbonation properties and a life expectancy that can exceed 30 years

Satisfies Class 'O' Building Regulations.
Outstanding CO2 and other acid gas.
Extremely high moisture vapour permeability.
High UV resistance for lasting appearance.
Dirt repellent.
Waterproof and blister proof.
Resistant to alkali, oil and grease.
Outstanding resistance to weathering.
Bright white colour (no yellowing).
Enhances lux values.
Life expectancy can exceed 30 years.

Weatherproof Smooth Matt Masonry Coating EM22
An advanced water-based, environmentally friendly, smooth, matt finish coating for masonry surfaces. Formulated for exceptional durability and weather resistance, with a life expectancy of 15 years. Exceptionally durable and weather resistant

High Opacity.
Very good adhesion to general masonry surfaces.
Minimal dirt retention - stays cleaner longer.
Blister proof.
Resistant to algae.
Life expectancy 15 years.

Weatherproof All Weather Masonry Coating PL1
An extremely durable exterior masonry paint. Containing a tough, synthetic polymer resin, PL1 is ideal for application in cold or humid conditions, with a life expectancy of 15 years. Can be applied in freezing temperatures

Unaffected by humidity.
All year round application.
Dries at temperatures below freezing.
Rain resistant shortly after application.
Self priming.
Moisture vapour permeable.
Life expectancy 15 years.

Weatherproof All Weather Masonry Coating PL10
A very durable exterior masonry paint. Containing a tough, synthetic rubber resin, PL1 is ideal for application in cold or humid conditions.

Unaffected by humidity.
All year round application.
Dries at temperatures below freezing.
Rain resistant shortly after application.
Self priming.
Moisture vapour permeable.

Weatherproofing Stabilising Solution SS01
A solvent based clear sealer for the pre-treatment of chalky, friable or porous masonry surfaces

Corridor Paint - 30 year protection
This is a high-performance, environmentally friendly water-based interior coating ideal for schools, universities in-fact anywhere that has high amounts of traffic and likely to suffer from scuffing etc.

Satisfies Class 'O' Building Regulations.
Dirt repellent.
Waterproof and blister proof.
Resistant to alkali, oil and grease.

Textured Coatings

Tough-Cote™ Medium Build Textured Coating PL13
This exceptionally durable, solvent based, ready to use textured coating with crushed marble aggregate is suitable for exterior decoration providing long life protection for virtually all common building substrates. It will provide at least 20 years protection and is suitable for all year round application.

Satisfies Class 'O' Building Regulations.
Solvent based - all year round use.
Can be applied, and will cure at temperatures below freezing.
Excellent adhesion to all sound substrates.
Weatherproofing, yet water vapour permeable.
Self priming.
Alkali resistant.
Moisture vapour permeable.
Flexible film resists cracking.
Minimum 20 Year protection.

Tough-Cote™ High Build Textured Coating PL16
A very durable, solvent based, spray applied textured coating with crushed marble aggregates and special preservative agents for algae and fungal film protection, PL16 is specifically designed for use as the finish coat in Glixtone's Seamless System for building boards. PL16 will provide decoration and long life for virtually all common building substrates giving at least 20 years protection.

Solvent based - all year round use.
Excellent adhesion to all sound substrates.
Ready to use.
Weatherproofing, yet water vapour permeable.
Self priming.
Alkali resistant.
Minimum 20 years protection.

Tough Cote™ High Build Flexible Textured Coating EM18
EM18 is an extremely durable, ready to use, water based, environmentally friendly protective and decorative textured coating that's suitable for internal and external use on virtually all common building substrates and will provide at least 15 years protection. The flexible film resists cracking and therefore reduces maintenance costs.

Satisfies Class 'O' Building Regulations.
Environmentally friendly -based formulation.
Excellent adhesion to all sound substrates.
Ready for use with no mixing or stirring.
Flexible, resists hairline cracks.
Moisture vapour permeable.

Tough-Cote™ Superflex Non-Abrasive Textured Coating RW2
This non-abrasive, water based, environmentally friendly elastomeric coating for exterior and interior walls is also ideal as a remedial coating on existing walls which have become porous or cracked. Showing exceptional flexibility, RW2 dries out to a tough, elastomeric film which is capable of extending to take up a new configuration if the substrate cracks or moves. This product will provide at least 15 years protection.

Satisfies Class 'O' Building Regulations.
Environmentally friendly water-based formulation.
Clean, fast and easy application.
Excellent adhesion to sound substrates.
Masks surface defects.

The Glixtone Seamless System provides an exceptionally durable, seamless finish for internal/external walls constructed with building boards. The system is designed to contribute to fast-track building techniques and provides a cost-effective alternative to high priced render systems. The Glixtone Seamless System is suitable for use on virtually any building board, and has been particularly successful on cement bonded particle board (CBPB) and calcium silicate boards.

Complete fully integrated proven system since 1992.
Accommodates substantial substrate and frame movement.
Textured finish helps to hide surface defects and slight joint imperfections.
Weatherproof, yet water vapour permeable.
Fade resistant colours.
Bespoke colour service.

All products used in the system were specially developed to provide the ultimate coating system for the 21st century

The Glixtone Seamless System offers a choice of water-based or solvent-based textured final coats.

Glixtone Tough-Cote™ Superflex Non-Abrasive Textured Coating RW2.
Glixtone Tough-Cote™ High Build Textured Coating PL16.

Polymer Modifier Adrend
An aqueous dispersion of mixed polymers specifically designed to modify cementitious compounds. Designed to partially or wholly replace the water component to improve flexibility, adhesion and final performance of mortars and concrete.

Lightweight Aggregate Adfil
A fine, lightweight aggregate to produce smooth renders with Portland cement and Adrend for the Glixtone Seamless Systems.

Joint and Repair Scrim
A specially woven polyester fabric for use in conjunction with SS03 and SF1 for the Glixtone Seamless System. May also be used for covering hairline cracks on rendered surfaces.

SS03 Thixotropic Sealer & Scrim Adhesive.
Designed for use with PWS9 Joint & Repair Scrim these products provide a weatherproof sealing and firm bonding.

SF1 Sealer & Scrim Adhesive.
An emulsion based, water dilutable scrim fixative and sealer for absorbent masonry surfaces also can be used in conjunction with PWS9 Joint & Repair Scrim along joints in board substrates (eg: plasterboard, cement particle board etc) prior to application of high build coatings such as Glixtone RW2 and PL16.

Sterilising Solution GS36 / GS37
These sterilising solutions are suitable for surface sterilisation of prepared substrates prior to application of the appropriate decorative system. GS37 is a specially prepared, ready-to-use water-based surface biocide which effectively kills spores, mould and algae. GS36 is a concentrated form of GS37.

Squash Court Paint

Glixtone Squash Court Paint approved for use by England Squash is formulated to give a hard-wearing, slightly flexible surface which does not affect the speed of the balls and is easy to clean. Squash Court Paint SQ1 is a superior quality solvent-borne coating based on the highest quality pigments and alkyd resins. SQ1 provides excellent opacity, outstanding durability and is quick drying. It is specially formulated for use in the painting of walled areas around squash courts and other leisure pursuit areas.

Roof Tile Paint

A quick air-drying topcoat for roof tile renovation to give an enhanced appearance and excellent weather resistance.

Available in a range of colours.